Methods to make springs by spring machine

Methods can be used to make springs by spring machine

Methods to make springs by spring machine
Manufacturers make springs using either the cold rolling process or the hot rolling process. In the cold rolling process, the wire that is used can be up to 58in diameter. In hot rolling, manufacturers can coil and fabricate into springs straight bars of steel up to 6in wire diameter. These are ideal for shock absorption. They can also use lightweight and micro wire, which can be as fine as .01and .002, respectively. Manufacturers can form stronger springs using flat and square wire, in addition to round wire, and tubular stock, which is also a popular material. They usually make industrial springs from thick wire, while they make smaller springs from wire that is flexible and thin. Some of these springs are too small to be seen by the naked eye.
One of the methods used to produce spring is by wire forming process, which involves winding wire around a metal blank. This method can also be used to produce other products, such as electrical coils, by utilizing a conductive wire instead of a regular wire.

Looking for best partner for your next construction works?

Contact Us

24 hours online service